ABNT Catálogo
ABNT Catálogo
Norma Técnica
Código
ISO 2719:2016  
Data de Publicação : 16/06/2016
Título : Determination of flash point — Pensky-Martens closed cup method
Título Idioma Sec. : Détermination du point d'éclair — Méthode Pensky-Martens en vase clos
Comitê : ISO/TC 28 Petroleum products and lubricants
Páginas : 22
Status : Em Vigor  
Idioma : Inglês
Organismo : ISO - International Organization for Standardization
Preço (R$) : 944,00
Objetivo : ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C. CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard. NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2]. Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C. Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of liquids with solids, liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A. Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751[13]. ISO 2719:2016 is not applicable to water-borne paints and varnishes. NOTE 2 Water-borne paints and varnishes can be tested using ISO 3679[3]. Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.
Normas Necessárias para a aplicação da ISO 2719:2016
ICS/CIN
75.080 - Produtos de petróleo em geral
Palavras-Chave
 
CURSOS (0 itens)
 
 
 
   
 
PUBLICAÇÕES (0 itens)
 
 
 
   

Vendas: (11) 3017-3648 / 3663 / 3610 atendimento.sp@abnt.org.br
Informações sobre Cursos: Capacitacao (11) 3017-3680 / 3681 / 3683 cursos@abnt.org.br
Certificação: (11) 3017-3691 certificacao@abnt.org.br
Informações técnicas sobre normas: (11) 3017-3645 / 3646 cit@abnt.org.br
Suporte para visualização de normas : (11) 3017-3621 suporte@abnt.org.br
Copyright 2021© - Associação Brasileira de Normas Técnicas