Código |
ISO 898-1:2013
|
Essa norma possui programa de certificação
|
|
|
|
|
|
|
|
|
|
|
Data de Publicação : |
14/01/2013 |
|
|
|
|
Título : |
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|
|
|
Título Idioma Sec. : |
Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié — Partie 1: Vis, goujons et tiges filetées de classes de qualité spécifiées — Filetages à pas gros et filetages à pas fin
|
|
|
|
Comitê : |
ISO/TC 2 Fasteners
|
|
|
|
|
|
|
|
|
|
Organismo :
|
ISO - International Organization for Standardization
|
|
|
|
Objetivo : |
ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of ISO 898-1:2013 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures (see Annex B) and/or lower temperatures.
Certain bolts and screws might not fulfil the tensile or torsional requirements of ISO 898-1:2013 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head.
ISO 898-1:2013 is applicable to bolts, screws and studs
made of carbon steel or alloy steel,
having triangular ISO metric screw thread in accordance with ISO 68-1,
with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3,
with diameter/pitch combinations in accordance with ISO 261 and ISO 262, and
having thread tolerances in accordance with ISO 965-1, ISO 965-2 and ISO 965-4.
It is not applicable to set screws and similar threaded fasteners not under tensile stress (see ISO 898-5).
It does not specify requirements for such properties as weldability, corrosion resistance resistance to shear stress, torque/clamp force performance (for test method, see ISO 16047), or fatigue resistance.
|
|
|
|
|
|
|
|
Normas Necessárias para a aplicação da
ISO 898-1:2013
|
|
|
|
|
|
|
|
|
|
ICS/CIN
Tabela internacional criada pela ISO para classificação e recuperação de normas técnicas
|
|
|
21.060.10 - Parafusos, pinos, parafuso prisioneiro |
|
|
|
|
|
Palavras-Chave
|
|
|
|
|
|
|
|
|